Free Trial

Cloud Video Surveillance Platform

Abnormal Body Temperature Alerting Solution

Cloud-enabled Thermal Imaging Scanning Camera with Enhanced Analytics

Learn More

Receive Smart Alerts From Cloud-Enabled Thermal Imaging Scanning Camera and Detect Abnormal Body Temperature

3dEYE is proud to showcase the latest intelligent thermal measurement system for accurate detection of facial temperatures of up to 16 people at once with an accuracy of ±0.3ºC and alerting algorithm in case the readings exceeds a specified temperature. This is ideal for monitoring body temperatures at entrances to events, transport hubs and buildings.

This system comprises a camera, an NVR, a temperature calibrating device (black body) and all the necessary brackets for installation.

Using advanced facial detection, the system uses the face temperature for a more accurate measurement which helps prevent false readings, such as when a person is carrying a hot drink. With astonishingly fast response time and being able to measure up to 16 people at once, the system will reduce the need for single file detection, aiding in the speed of people passing through the detection area.

SEC-BODYTEMPCAM1

  • On-board temp-detection algorithm
  • One IP address two channels
  • Standard Image: 2 Megapixel (1920 x 1080) Resolution
    Thermal Image: Effective pixels 400×300
  • Sensitivity 40mK
  • Thermal: 8mm Fixed lens, Visible: 2.7-12mm motorized lens
  • Accuracy within 0.54°F (0.3°C)
  • Body detection, up to 16 Targets
  • Response Time 30ms
  • 17 color control

Disclaimer: These cameras are not medical devices and cannot diagnose coronavirus infection. When configured correctly, the products discussed here can identify individuals showing higher than average temperature relative to a sample population. Only a licensed medical professional can determine if a "hot" individual is experiencing an abnormal medical condition.

Key Features

Fast temperature measurement (<30ms response time)

High temperature accuracy (±0.3ºC)

Long distance, non-contact detection

Only measures facial temperature

Dual Spectrum Technology (overlay temperature reading in live view)

Ideal for multi-site projects

iOS and Android Apps

Included Cloud Storage and Analytics

A complete remote automated and scalable thermal detection solution

Sample Setup

Cloud-enabled Thermal Imaging Scanning Camera with Enhanced Analytics

Technical Specification

Detector Type:
Uncooled IRFPA Microbolometer
Effective Pixels:
400(H) ×300(V)
Pixel Size:
17um
Thermal Sensitivity (NETD):
40mK @F1.0, 300K
Spectral Range:
8~14um
Image Setting:
Polarity LUT/ DVE/ Mirror/ FCC/ /3D DNR Brightness/Contrast/ ROI
Color Palettes:
Black-Heat /White-Heat/Rainbow/Iron-Red up to 17modes

Thermal Lens

Lens Type:
Fixed
Focus Control:
Manual Focus
Focal Length:
8mm
F No.:
F1.0
Angle of View:
H: 46°, V:35.3°

Visible Camera

Image Sensor:
1/1.9" Sony CMOS
Effective Resolution:
1920(H)×1080(V)
Min. Illumination:
Color: 0.01Lux @(F1.2, AGC ON)
B/W: 0.001Lux @(F1.2, AGC ON)
S/N Ratio:
More than 55dB
Focal Length:
2.7 ~ 12mm
Max Aperture:
F1.6~ F2.9
Angle of View:
105°~ 32°
Focus Control:
Motorized

Video and Audio

Compression:
H.265, H.264, MJPEG
Frame Rate:
Main Stream:
Thermal: D1 @25/30fps
Visible: 1920×1080/1280×720 @25/30fps
Sub Stream:
Thermal: CIF @25/30fps
Visible: D1/VGA/640×360/CIF/QCIF/QVGA @25/30fps
Bit Rate Control:
CBR/VBR
Bit Rate:
Thermal: 100Kbps~6Mbps
Visible:
main stream: 500Kbps~10Mbps;
sub stream: 100Kbps~6Kbps
Region of Interest:
Off / On (8 Zone, Rectangle)
Digital Zoom:
16x
Mirror:
Support
Defog:
Support
Motion Detection:
Support
Privacy Masking:
Off / On (4 Area, Rectangle)
DVE Image Enhance:
Support
Audio Compression:
G.711, AMR, RAW_PCM (Optional)

Intelligence

Intelligent Functions:
Motion detection, Disk alarm, I/O alarm, Temperature alarm
IVS:
Smart Body Detection, Perimeter, Single Virtual Fences, Double Virtual Fences, Object Left, Object Removed

Temperature Detection

Detection Mode:
Body temperature monitoring
Detection Preset:
Max 16 goals
Temperature Alarm:
Over temperature alarm, Temperature difference alarm
Accuracy:
≤ 0.54° (0.3 ℃) Emission rate, distance, ambient temperature
Response Time:
≤30ms
Theory of temperature measurement range:
-4°F ~ 140°F (-20 °C ~ 60 °C)
Temperature display mode:
Temperature target >5℃, Display absolute temperature value;
Temperature target ≤5℃, Display relative temperature value (temperature difference DEV = highest value -average)

Network

Ethernet:
RJ-45 (10/100 Base-T)
Protocols:
IPv4/IPv6, HTTP, RTSP/RTP/RTCP, TCP/UDP, DHCP, DNS, PPPOE, SMTP, SIP, 802.1x
Interoperability:
ONVIF, CGI, SDK
Streaming Method:
Unicast
Max. User Access:
10 Users
Edge Storage:
NAS
Local PC for instant recording
Micro SD card 128GB
Web Viewer:
<IE11, Chrome, Firefox
Web Language:
English, Chinese, Polish, Italian, Portuguese, Spanish, Russian, French, Czech, Hungarian

Interface

Ethernet:
1 Ethernet (10/100 Base-T) RJ-45 Connector
Audio Interface:
1ch Audio In, 1ch Audio Out
Alarm:
2ch Alarm In, 2ch Alarm Out
RS485:
Support
BNC Output:
N/A
Reset Button:
Support (Built-in)

General

Power Supply:
DC12V/POE (IEEE 802.3af)
Power Consumption:
Max 10W
Operating Temperature:
-30°C~60°C(-22°F~140°F)
Storage Conditions:
0~ 90% RH
Certifications:
CE /FCC
Ingress Protection:
IP66
Casing:
Metal
Dimensions:
8.34” x 7.16” x 5.35” (212×182×136mm)
Net Weight:
4.4lbs (2Kg)
Mounting Options:
Ceiling or Wall Brackets Optional
All Cameras

Our Technology partners

Expertise you can trust

Free Trial